d-briDGe PRO Package 3, For Toyota, Opel & Lexus
€2,350.00 ex. VAT
DG Technologies d-briDGe PRO package 3
Available on back-order
DG Technologies d-briDGe PRO Package 3, A ready to use package with partitioned lap top for Toyota, Lexus and Opel
Want to get started and learn J2534/Pass thru with no hassle
- Why not start with this package which has 3 brands that gives full access to reprogramming, diagnostics and workshop manuals and there subscriptions are reasonably priced.
- The 3 brands that will be prepared, installed and tested for you are Opel, Toyota and Lexus and these brands account for approximately 22% of the Irish car park
- The idea of this package is to remove the hassle for you as setting up some of the OEMs software’s can be quite a painful time consuming process,
- So when you receive this package all you have to do is go to there site and buy a valid subscription activate it and your ready to go, Also we will be available to help if you have any problems
These 3 brands allow the following functions with a J2534/Pass thru interface
Opel = Full dealer level diagnostics, coding, reprogramming and special functions for Insignia and all models launched after the Insignia approx 2009 onwards with GDS2 and SPS software.
Models from 2000 to 2009 no diagnostics just SPS reprogramming/re flashing.
Requires enhanced access to perform security related functions eg Immobilizers functions ect and user must apply for this on there own.
Toyota = Full dealer level diagnostics, coding, reprogramming and special functions for all models from approximately 2002 onwards with Techstream and calibration wizard software.
Special permission my be required for Immobilizers functions.
Lexus = Full dealer level diagnostics, coding, reprogramming and special functions for all models from approximately 2002 onwards with Techstream and calibration wizard software.
Special permission my be required for Immobilizers functions.
Also once you are a registered user you can also buy timed access to the above brands workshop manuals
And then when you are ready you can move on to other brands of your choice as you will already have the d-briDGe PRO which is a true J2534 interface and is compatible with all manufactures J2534 software and you will also have the lap top with 2 spare partitions to install other brands on (The 2 extra partitions can be used for many different brands (depending on size required) but some brands may require a separate lap top eg Mercedes, BMW)
The package includes the following
- Main interface and leads/cables
- CD with software and drivers
- Carry bag
- 2 years warranty
- DG Technologies information on setting up and using OE software (for some brands)
- Ongoing email and phone support for DG software drivers and hardware
- 5 hours training/support/setup, delivered via any of the following methods,
One to one training at our premises, Remotely via some or all of the following methods, Team viewer, Skype, Phone and email.
- Access to our OESIS (OE software information system) information system which has information and videos on how to sign up, download, install and use OE software’s for the following brands Ford, Opel, Toyota, Lexus and VAG group and many more brands being developed
- Refurbished Lap top with windows 7 professional, I5 processor and 4GB of RAM, hard drive 500GB split up into 5 different partitions with 3 being used for the above brands and the other 2 partitions spares for other brands
- Create online accounts with you for the above brands
- Toyota, Lexus and Opel software’s set up, installed and tested and ready to go (after you purchase valid subscription)
- Generic J2534/Pass thru training (Please enquire for pricing)
- Extra training on using OE software for the following brands Ford, Opel, Toyota, Lexus, VAG group and Volvo and more brands in the future
- Extra Support/setup time
Ideal for people new to J2534/Pass thru and wanting to get started quicker without having to do all the research themselves
Read the below to find out more general information about J2534/Pass thru and the d-briDGe PRO
DG Technologies d-briDGe PRO
d-briDGe PRO is a comprehensive ECU re programmer with built-in OBDII diagnostic capability for service bay repairs and automotive engineering
A true J2534 pass-thru programmer & diagnostic tool for newer cars (approx 2005 onwards)and light commercial vehicles with unlimited functionality that is only restricted by the OEM reprogramming application or diagnostic software capability.
Are all J2534 interfaces the same:
- In theory yes they should be but in reality they are not
- Some interfaces or diagnostic tools that claim to be J2534 compatible don’t have all the different protocols and some may be just J2534-1 and not have J2534-2 or 3
- And many other J2534/pass thru tool manufactures make many claims about how there tool is fully compatible with all brands and all OE software’s but yet they may not have tested all brands so these claims may have to be taken with a pinch of salt as NO one can claim full compatibility
- We only claim full compatibility with the brands we have tested ourselves and if there is any know problems we will let you know
- Some other J2534/pass thru tool manufactures say things like easy ECU programming or software updates by using the OEM software’s with there interface and again in reality they cannot make this claim as how easy it is depends a lot on how the easy the particular OEM designs there software
- But DG Technologies have been in this business for many years and is validated by a huge range of manufacturers
What is J2534/Pass thru?:
J2534/Pass thru is a standard for communications between a computer and a vehicle.
It was brought into EU law that all car manufactures must provide access to reprogramming files and software for reprogramming for EURO 5 and onwards built vehicles
A J2534 compatible interface can be used to reprogram most control units on all EURO 5 and onwards compatible vehicles (with a valid subscription and for security related control units some manufacturers may require extra subscriptions and identification checks)
Euro 5 was brought into effect for new type approvals (new models) from the 1st September 2009 and new registrations from 1st January 2011.
The law states that the manufacturers only have to give access to the independent aftermarket for technical information (workshop manuals) and reprogramming from the above dates but some manufacturers also gave diagnostics and access to older vehicles some back as far as 2000.
The main brands that gave access to full diagnostics as well as programming/reprogramming are (and more manufactures may follow suite in the future)
- Audi 2005 onwards approx.
- BMW 2001 onwards (no programming for most bus systems)
- Opel 2009 onwards (With GDS software)
- Seat 2005 onwards approx.
- Skoda 2005 onwards approx.
- Toyota 2002 onwards approx.
- Lexus 2002 onwards approx.
- Land Rover 2005 onwards approx.
- VW 2005 onwards approx. (not Transporter T5 and Touareg 7LA or any other older VAG vehicle that uses K-line)
- Volvo 2005 onwards approx.
Most other brands only give access to technical information and reprogramming for Euro 5 compatible vehicles
So with the d-briDGe PRO and a subscription you can have OE diagnostics on the above brands and reprogramming for others,opening up new jobs to garages that would have been sent to the dealer before
The d-briDGe PRO has many special features included in its own software
- The d-briDGe PRO Validation Tool software allows technicians to clearly see that the vehicle network is communicating with the d-briDGe PRO and the d-briDGe PRO is connected properly to the computer. DG is the only manufacturer in the industry with this software. This application saves technicians troubleshooting time and provides a graphical display of the vehicle network connection.
- Get current calibration from engine ECU to help you check if a later version is available
- Read VIN from engine ECU
- EOBD/OBD diagnostics
- J2534-1 and J2534-2
- J1850 VPW GM Class 2
- GMLAN (HSCAN, SWCAN)
- ISO14230 (KWP2000)
- J2411 – SWCAN
- D-PDU/ISO 22900
- ISO 11898
- ECU Reprogramming and OEM Factory Level Diagnostics
- 4 High-Speed CAN Channels, K-LINE
- Includes Free Essential OBDII Diagnostic Software
- Compatible with both SAE J2534-1 and J2534-2
- 2 Year Extended Warranty Free with Registration
- Software Development Kit
- J2534 Validation Tool (JVT) Software
- High-Speed USB Connection
- Compatible with Windows: 7, 8, & 10
- Made in the U.S.A.
Other packages also available for Ford, VAG group and Volvo please inquire for more info
Call us for more information or to arrange a demo
If you wish to purchase the d-briDGe PRO Package 3 please read carefully the Ryans Automotive d-briDGe PRO purchase agreement and sign and return to us by fax, (Note can take up to 3 weeks to deliver as need time to set up lap top)
|Dimensions||32 × 24 × 7 cm|
Only logged in customers who have purchased this product may leave a review.