D-briDGe PRO Package 4, For VAG Group

2,250.00 ex. VAT

DG Technologies d-briDGe PRO package 4

Available on back-order

Product Description

D-briDGe PRO Package 4, For VAG Group


DG Technologies d-briDGe PRO Package 4, A ready to use package with partitioned lap top and Pass-Thru device for VAG Group vehicles

Want to get started and learn J2534/Pass thru with no hassle

  • Why not start with this package which has 3 brands, Volkswagen, Audi and Skoda that gives full access to reprogramming, diagnostics and workshop manuals and there subscriptions are reasonably priced.
  • To get set up to use the official software for the above brands you 1st need to register on the 3 Erwin websites and then when you have your login details get on to VW Ireland to setup your subscription and receive the security token. (There is a one of fee and a yearly fee for the security token to be paid to VW Ireland, contact us for more info on this)
  • The idea of this package is to remove some of the hassle for you as setting up some of the OEMs software’s can be quite a painful time consuming process, so with this package we will install,set up and test the software and provide training and support on using it.
  • So when you receive this package and you have all the application process done with VAG and you have all your login details all you have to do is go to the brands Erwin site and buy a valid subscription,activate it and your ready to go, Also we will be available to help if you have any problems

The ODIS diagnostic time subscriptions range from

  • €10 for one hour
  • €25 for one day
  • €110 for 7 days
  • €210 for 1 month
  • €1760 for 1 year

The Erwin Workshop manual subscriptions range range,

  • €7 for one hour
  • €30 for one day
  • €130 for 7 days
  • €310 for 1 month
  • €2850 for 1 year

The package includes the following


  • Main interface and leads/cables
  • Carry bag
  • CD with software and drivers
  • DG Technologies information on setting up and using OE software (for some brands)
  • 2 years warranty
  • Ongoing email and phone support for DG software drivers and hardware
  • 5 hours training/support/setup, delivered via any of the following methods,
    One to one training at our premises, Remotely via some or all of the following methods, Team viewer, Skype, Phone and email.
  • Access to our OESIS (OE software information system) information system which has information and videos on how to sign up, download, install and use OE software’s for the following brands Ford, Opel, Toyota, Lexus and VAG group and many more brands being developed
  • Refurbished Lap top with windows 7 professional, I5 processor and 4GB of RAM, hard drive 500GB split up into 2 different partitions so you can have 2 different versions installed
  • Create online accounts with you for the above brands and advise on the application process with VAG
  • VAG group software for Volkswagen, Audi and Skoda set up, installed and tested and ready to go (after you purchase valid subscription and have all your other log in details and secure id token)


  • Generic J2534/Pass thru training (Please enquire for pricing)
  • Extra training on using OE software for the following brands BMW, Ford, Opel, Toyota, Lexus, VAG group and Volvo and more brands in the future
  • Extra Support/setup time

Ideal for people new to J2534/Pass thru and wanting to get started quicker without having to do all the research themselves

Read the below to find out more general information about J2534/Pass thru and the d-briDGe PRO
DG Technologies d-briDGe PRO

d-briDGe PRO is a comprehensive ECU re programmer with built-in OBDII diagnostic capability for service bay repairs and automotive engineering

A true J2534 pass-thru programmer & diagnostic tool for newer cars (approx 2005 onwards)and light commercial vehicles with unlimited functionality that is only restricted by the OEM reprogramming application or diagnostic software capability.

Are all J2534 interfaces the same:

  • In theory yes they should be but in reality they are not
  • Some interfaces or diagnostic tools that claim to be J2534 compatible don’t have all the different protocols and some may be just J2534-1 and not have J2534-2 or 3
  • And many other J2534/pass thru tool manufactures make many claims about how there tool is fully compatible with all brands and all OE software’s but yet they may not have tested all brands so these claims may have to be taken with a pinch of salt as NO one can claim full compatibility
  • We only claim full compatibility with the brands we have tested ourselves and if there is any know problems we will let you know
  • Some other J2534/pass thru tool manufactures say things like easy ECU programming or software updates by using the OEM software’s with there interface and again in reality they cannot make this claim  as how easy it is depends a lot on how the easy the particular OEM designs there software
  • But DG Technologies have been in this business for many years and is validated by a huge range of manufacturers

What is J2534/Pass thru?:
J2534/Pass thru is a standard for communications between a computer and a vehicle.
It was brought into EU law that all car manufactures must provide access to reprogramming files and software for reprogramming for EURO 5 and onwards built vehicles
A J2534 compatible interface can be used to reprogram most control units on all EURO 5 and onwards compatible vehicles (with a valid subscription and for security related control units some manufacturers may require extra subscriptions and identification checks)

Euro 5 was brought into effect for new type approvals (new models) from the 1st September 2009 and new registrations from 1st January 2011.

The law states that the manufacturers only have to give access to the independent aftermarket for technical information (workshop manuals) and reprogramming from the above dates but some manufacturers also gave diagnostics and access to older vehicles some back as far as 2000.
The main brands that gave access to full diagnostics as well as programming/reprogramming are (and more manufactures may follow suite in the future)

  • Audi 2005 onwards approx.
  • BMW 2001 onwards (no programming for most bus systems)
  • Mini
  • Opel 2009 onwards (With GDS software)
  • Seat 2005 onwards approx.
  • Skoda 2005 onwards approx.
  • Toyota 2002 onwards approx.
  • Lexus 2002 onwards approx.
  • Land Rover 2005 onwards approx.
  • VW 2005 onwards approx. (not Transporter T5 and Touareg 7LA or any other older VAG vehicle that uses K-line)
  • Volvo 2005 onwards approx.
    Most other brands only give access to technical information and reprogramming for Euro 5 compatible vehicles

So with the d-briDGe PRO and a subscription you can have OE diagnostics on the above brands and reprogramming for others,opening up new jobs to garages that would have been sent to the dealer before

The d-briDGe PRO has many special features included in its own software

  • The d-briDGe PRO Validation Tool software allows technicians to clearly see that the vehicle network is communicating with the  d-briDGe PRO and the d-briDGe PRO is connected properly to the computer. DG is the only manufacturer in the industry with this software. This application saves technicians troubleshooting time and provides a graphical display of the vehicle network connection.
  • Get current calibration from engine ECU to help you check if a later version is available
  • Read VIN from engine ECU
  • EOBD/OBD diagnostics


Supported protocols:

  • J2534-1 and J2534-2
  • CAN
  • J1850 VPW GM Class 2
  • ISO15765
  • ISO9141(KWP2000)
  • ISO14230 (KWP2000)
  • J2284
  • J2411 – SWCAN
  • D-PDU/ISO 22900
  • ISO 11898


  • ECU Reprogramming and OEM Factory Level Diagnostics
  • 4 High-Speed CAN Channels, K-LINE
  • Includes Free Essential OBDII Diagnostic Software
  • Compatible with both SAE J2534-1 and J2534-2
  • 2 Year Extended Warranty Free with Registration
  • Software Development Kit
  • J2534 Validation Tool (JVT) Software
  • High-Speed USB Connection
  • Compatible with Windows: 7, 8, & 10
  • Made in the U.S.A.


Other packages also available for BMW, Ford, Opel, Toyota/Lexus and Volvo please inquire for more info
Call us for more information or to arrange a demo

If you wish to purchase the d-briDGe PRO Package 4 please read carefully the Ryans Automotive d-briDGe PRO purchase agreement and sign and return to us by fax, (Note can take up to 3 weeks to deliver as need time to set up lap top)


Product Specifications

Weight 1 kg
Dimensions 32 × 24 × 7 cm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

    If you want to book a demo for this product, either in our garage or at a venue convenient to you, please complete the following form.

    Your Name (required)

    Your Email (required)

    Company/Business Name

    Your Phone (required)

    Additional Message

      If you want to ask a pre-sale question about this product, please feel free to use the form below.

      Your First Name (required)

      Your Phone (required)

      Your Last Name (required)

      Your Email (required)

      Your Question