RyansAutomotive.ie

OBD Break Out Box And Tester

209.00 ex. VAT

OBD break out box and tester

1 in stock (can be backordered)

Product Description

OBD break out box and tester

This is not your average OBD break out box or CAN test box, it has many more functions than its competitor tools.

Features/Functions:

  • Built in light to aid finding the OBD port
  • Test all 16 pins in the OBD port
  • Test for power supply and grounds in OBD port
  • Allows you to switch the inbuilt voltmeter to display the voltage on the various pins
  • Blue/red LEDs display on each pin and depending on the pin and the colour will give details on whats happening on the pins
  • Monitor of battery voltage via inbuilt volt meter – necessary when performing diagnostics, programming and coding
  • Audible warning beeps if battery voltage goes under 11.8 volts (12 volt systems) and 23.6 volts (24 volt systems)
  • Audible warning beeps if battery voltage goes over 15.5 volts (12 volt systems) and 31.0 volts (24 volt systems)
  • Check charging voltage
  • Detect communication protocol
  • As a break out box for ease of connecting oscilloscope or multimeter
  • Use as a data saver when replacing battery when used in conjunction with the optional data saver cable (make sure not to have any loads switched on in the vehicle when when doing this)
  • Use as a 12 volt power source and ground for other devices – max load 5 amps
  • Use to bridge pins in OBD port for reading blink codes on certain vehicles and the bridging of pins is also required in other certain cases to reset and relearn particular systems
  • 2mm female connection
  • Comes with 2 x 2mm male to 4mm female adaptors

Product Specifications

Weight .5 kg
Dimensions 30 × 20 × 12 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

If you want to ask a pre-sale question about this product, please feel free to use the form below.


Your First Name (required)

Your Phone (required)

Your Last Name (required)

Your Email (required)

Your Question