Product Description
Used Autoland iSCAN 3e Pro Diagnostic System, Updates valid till 28/05/2025
Autoland Scientech iSCAN 3e (also known as iSCAN SF in the US)
Note SOD/software on demand service currently not available from us outside of Ireland.
And some limitations apply in Ireland.
Please inquire for more information.
About Autoland Scientech
Autoland Scientech has been manufacturing quality automotive diagnostic equipment for over 20 years. With headquarters in Japan, Taiwan and Singapore, Mexico, USA and Europe.
Autoland is a manufacturer of many well known scan tools such as iScan, iScan II, iScan II wt, iScan 3, e-iSCAN, VeDiS, VeDiS II, VeDis 3 and DOL. Autoland started out producing engine analyzers as its primary focus. In the early 90s along with the inception of OBD Autoland was the first one to design an aftermarket handheld device that could diagnose Mercedes Benz vehicles.
Autoland has always strived to provide not only quality Diagnostics but affordable Diagnostics and innovative solutions for diagnostics. Autoland was the first aftermarket company to provide the ability to share with others the power of accessing diagnostic software for over 40 brands (Now over 60) paying a low cost license subscription.
Autoland Scientech products were selected as one of Motor Magazine’s Top 20 Tools in 1999 and again in 2010
The iSCAN 3e is the latest model from Autoland Scientech
This new unit is based on the Vedis 3 and has the exact same multi brand coverage as the Vedis 3 and it is also based on the same operating system and has the same software layout and general multibrand diagnostic functions
The main differences from the Vedis 3 are:
- Hardware is a little different, has 2 handles on the sides, and a fold prop for tool to stand, and some other minor hardware changes
- And iSCAN 3e can now also have some the software’s like retrofits + conversions, coding and programming, these software’s were previously only available on the iSCAN 3 before this
This unit combines all the latest features you would expect in a modern diagnostic tool with Autolands world renowned diagnostic software
Features / Main Functions
- Fault code read and clear
- Current Data numerical and graphing
- Actuation test
- System Identification (ECU number)
- Adaptation and coding dependent on vehicle and system
- Printable Customer Relationship manager
- Superior boot up and Connection Speed for Fast Service
- Vehicle and Module auto detection(on most makes and models)
- Built-in remote control and support availability via team viewer
- Wireless internet connection for software updates and browsing the internet
- Browse online for fault code/repair information by just clicking on the fault code
- Wireless printing capability
- 8 inch IPS High Resolution Touch Screen
- External memory storage compatibility
- Continuous Software Updates via the internet
- over 60 brands listed in the software
- Used everyday in our own diagnostic workshop
- J2534 function
Multibrand capabilities
Here is a brief list of the systems that can be diagnosed with the i-SCAN 3e
- Engine electronics
- ABS/ Traction control/ESP
- Airbag
- Transmission control
- Immobilizer
- A/C system
- Suspension electronics
- Instrument panel
- Service reset
- EPS
- EPB
- TPMS
- Radio
- Parking assistance
- Auxiliary heating
- CAN network
- Body computer
- Plus many other systems
As well as providing the normal diagnostic functions the range can also complete a huge amount of special functions such as
- Particulate filter regeneration/replacement and settings
- Common rail injector coding
- Common rail IMV/SCV/DRV valves learning
- Key coding (on some makes and models)
- Electronic brake caliper functions
- Service resets
- Steering angle calibration
- TPMS programming
- Control Unit coding
- and many other special functions
The i-SCAN 3e gives you the best Asian coverage on the market today and also has near dealer level coverage on the following vehicles—Porsche, Volvo, Mercedes Benz, Ford, Land Rover and BMW and superb coverage on most others
Vehicle Coverage
- Asian Vehicles: Acura, Chevrolet, Daewoo, Daihatsu, Formosa, Greatwall, Holden, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR, Perodua, Proton, Scion, Ssangyong, Subaru, Suzuki, Toyota
- European Vehicles: Alfa-Romeo, Audi, Bentley, BMW, Citroen, Fiat, Ford, Jaguar, Lancia, Landrover, Maybach, Maserati, Mercedes-Benz, Mini, Opel, Peugeot, Porsche, Renault, Rools Royce, Saab, Seat, Skoda, Smart, Vauxhall, Volkswagen, Volvo
- USA Vehicles: Buick, Chevrolet, Chrysler, Dodge, Ford, GM, GMC, Jeep, Oldsmobile, Pontiac, Saturn,
- Super Cars: Ferrari, lamborghini, Nissan GTR and Maserati
- Asian Trucks: Dyna, UD, Isuzu, Hino, Mitsubishi/Fuso
OTHER FEATURES (all 3 versions)
OEM capabilities with the J2534 function
The Vedis 3 has also has J2534 capability . What this means is if you have a subscription / software for the below OEMs and have it installed on your own laptop you can use the Vedis 3 as an interface between your laptop and your vehicle.
Here is a list of the brands that its is J2534 compatible with
- Ford FMP/ETIS software function
- Honda = HDS
- Jaguar and Land Rover = SDD
- Mazda = MMP
- Toyota and Lexus = Techstream
- Opel/Vauxhall and Chevrolet = GDS and SPS (not tech 2 win)
- Subaru = SSM4
- Volvo = Vida
Super car package:
The Vedis 3 is one of the few tools on the market to have diagnostic coverage for the following super cars
- Lamborghini
- Ferrari
- GTR
- Maserati
Asian Truck Package
Also one of the few tools to cover Asian light trucks such as,
- Dyna
- Fuso
- Hino
- Isuzu
- UD
Retrofits and Conversions
Example of some of the settings that can be done depending on make and model, has coverage for the most popular settings, more coming with each update
- Remote control mirror fold
- ECO start stop
- Change seat belt reminder warning
- Windows remote control
- Enable DVD/TV while driving
- AC settings
- Follow me home lighting
- Enable day time running lights
- And much more for the Following brands BMW, Mercedes, Porsche, Ford, Landrover, Mini, VW and Audi
Programming And Coding
Also on the iScan 3e pro version you can perform programming, coding / encoding for the following brands on a huge range of models and systems. More brands and systems to follow soon.
- BMW, approx 2004 on wards not MOST BUS systems
- Ford some models and some systems 2005 on wards
- Land rover some models and some systems approx. 2007 on wards
- Mazda some models and some systems 2005 on wards
- Mercedes some models and some systems
- Porsche, some models engine electronics only at the moment
Included in the iSCAN 3e Kit
- Updates until 28/05/2025
- i-SCAN 3e base unit
- J2534 application
- Main cable
- OBD-II 16 pin adapter
- Mains power supply
Optional extras :
- Pre 16 pin connectionsHere is a list of the OEM interfaces that the iScan II wt can simulateThis is not just J2534 capabilities its simulating the official interface
- ICOM and NEXT A for BMW and Mini brands
- Star C4 / SD connect for Mercedes and Smart brands
- Piwis2 for Porsche
- VAS 5054A and VAS 5055 for Audi, Seat, Skoda and VW
Click here to view the coverage list.